Multiplier = √(rise² + 12²) ÷ 12. Multiply your flat footprint area by this number to get the actual sloped roof surface. A 6/12 pitch has a multiplier of 1.118, so a 2,000 sq ft footprint is really 2,236 sq ft of roof.
Loading calculator…
Pitch multiplier and hip/valley factor for every pitch
| Pitch | Angle | Slope % | Multiplier | Hip / valley | Rafter per 12" run |
|---|---|---|---|---|---|
| 0.25/12 | 1.19° | 2.08% | 1.0002 | 1.4144 | 12.00" |
| 0.5/12 | 2.39° | 4.17% | 1.0009 | 1.4148 | 12.01" |
| 1/12 | 4.76° | 8.33% | 1.0035 | 1.4167 | 12.04" |
| 1.5/12 | 7.13° | 12.50% | 1.0078 | 1.4197 | 12.09" |
| 2/12 | 9.46° | 16.67% | 1.0138 | 1.4240 | 12.17" |
| 2.5/12 | 11.77° | 20.83% | 1.0215 | 1.4295 | 12.26" |
| 3/12 | 14.04° | 25.00% | 1.0308 | 1.4361 | 12.37" |
| 3.5/12 | 16.26° | 29.17% | 1.0417 | 1.4440 | 12.50" |
| 4/12 | 18.43° | 33.33% | 1.0541 | 1.4530 | 12.65" |
| 4.5/12 | 20.56° | 37.50% | 1.0680 | 1.4631 | 12.82" |
| 5/12 | 22.62° | 41.67% | 1.0833 | 1.4743 | 13.00" |
| 5.5/12 | 24.62° | 45.83% | 1.1000 | 1.4866 | 13.20" |
| 6/12 | 26.57° | 50.00% | 1.1180 | 1.5000 | 13.42" |
| 6.5/12 | 28.44° | 54.17% | 1.1373 | 1.5144 | 13.65" |
| 7/12 | 30.26° | 58.33% | 1.1577 | 1.5298 | 13.89" |
| 7.5/12 | 32.01° | 62.50% | 1.1792 | 1.5462 | 14.15" |
| 8/12 | 33.69° | 66.67% | 1.2019 | 1.5635 | 14.42" |
| 8.5/12 | 35.31° | 70.83% | 1.2255 | 1.5817 | 14.71" |
| 9/12 | 36.87° | 75.00% | 1.2500 | 1.6008 | 15.00" |
| 9.5/12 | 38.37° | 79.17% | 1.2754 | 1.6207 | 15.31" |
| 10/12 | 39.81° | 83.33% | 1.3017 | 1.6415 | 15.62" |
| 11/12 | 42.51° | 91.67% | 1.3566 | 1.6853 | 16.28" |
| 12/12 | 45.00° | 100.00% | 1.4142 | 1.7321 | 16.97" |
| 13/12 | 47.29° | 108.33% | 1.4743 | 1.7815 | 17.69" |
| 14/12 | 49.40° | 116.67% | 1.5366 | 1.8333 | 18.44" |
| 15/12 | 51.34° | 125.00% | 1.6008 | 1.8875 | 19.21" |
| 16/12 | 53.13° | 133.33% | 1.6667 | 1.9437 | 20.00" |
| 18/12 | 56.31° | 150.00% | 1.8028 | 2.0616 | 21.63" |
| 20/12 | 59.04° | 166.67% | 1.9437 | 2.1858 | 23.32" |
| 24/12 | 63.43° | 200.00% | 2.2361 | 2.4495 | 26.83" |
What is the difference between the pitch multiplier and the hip/valley factor?
The pitch multiplier converts a horizontal run into a sloped length along a common rafter. The hip and valley factor does the same for a rafter running diagonally at 45 degrees in plan, so it uses √(rise² + 2 × 12²) ÷ 12 and is always the larger number.
Can I use the multiplier to find rafter length?
Yes. Multiply the horizontal run by the multiplier and you get the rafter line length. Remember to deduct half the ridge thickness and add the tail for the overhang.
